A self-controlled robot with specific dimensions and features. It is also designed in hostile shapes which qualify it to fight.
Project tutorial by AhmedAzouz
PV panel simulation for tracking solar movement.
Project tutorial by Fikret
You can use different appliances. This project will turn the DC motor on or off by clapping.
Project tutorial by Nakshatra401
In this project, I will teach you how to make an obstacle avoiding robot that works with Arduino.
Project tutorial by Aarav Garg
It's a BLDC motor based jet turbine.
Project tutorial by Arnov Sharma
An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
This is my first Arduino-based, Bluetooth-controlled RC car.
Project in progress by Saman Fernando
Diversity Adaptive Obstacle Avoiding Robot
Project showcase by Team Maverick
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
A simple way to control a motor with a potentiometer and an Arduino.
by Benjamin Larralde
Here is a step by step guide to making a "crawler robot."
Project tutorial by MEGA DAS
How to use a Servo.
Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor
Project in progress by ashleyblack
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.
Project tutorial by Mark Tashiro
Control an Arduino robot with a smartphone using ESP8266.
The Critter is a simple Arduino walking robot that is fully 3D printed.
Project showcase by Slant Concepts
Objective of the Swarm-bots project is to study controlling the bot so assemble themselves, avoid obstacle and synchronization between bots.
Project tutorial by Team Hermes
A walking insect looking thing made from leftovers.
Project tutorial by Jeremie
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
My first project in Arduino platform. I combined two features in this project, Bluetooth control mode and obstacle avoiding mode.
Project showcase by KureBas Robotics
Or connect with your social account:
New here? Create an account