This lesson, aims to show how to to control a servo using virtual buttons on an interface created by the Anniken Andee Shield!
Project tutorial by Arduino_Scuola
A Simple IoT Car!
Project tutorial by P3RISH
This is a fun little delta robot that is mostly 3D printed with no special parts. The delta robot uses 3 stepper motors to move.
Project showcase by tinkersprojects
Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.
Project showcase by potentprintables
Throttle by wire design utilizing a pedal assist circuit remotely controlled by a smartphone.
Project in progress by Stephen Sizensky
We designed a car that was able to sense objects and turn to avoid them.
Project showcase by Team Fabrizzio and Casey's Robot Cars
Otto Diy is a bipedal robot, driven by microcontrollers and controlled by a remote, able to walk and turn around.
Project tutorial by momograma and PonsiDanilo
This project uses the capabilities of the gen4-uLCD-43DT to collaborate with diverse platforms such as Arduino and HC-05 Bluetooth Module.
Project tutorial by 4D Makers
This project is a mechanical clock using an Arduino uno, and servos to move hands around the dial.
Project showcase by garysat
Make an R2-D2 replica and control it by an app you programmed. Add a Nokia interface which gives you the Star Wars characters info.
Project tutorial by Kutluhan Aktar
In this guide, we will be adding Infrared Remote Control to a RobotGeek Geekbot.
by RobotGeek Projects Team
Mr. Big is a large mobile unit that can carry weight up to 8kg.
Project tutorial by mishrarahul1997
This project shows us how we control a "Micro Robot Car" and using a RF Remote Control with "Infineon 3D Magnetic Sensor 2Go".
Project tutorial by Guillermo Guillen
Interface board capable of communicating an Arduino board or any microcontroller to the Dynamixel motors.
by Josue Alejandro
GRBL and CNCJS Tutorial
Project tutorial by Arnov Sharma
A sundial type clock with stepper motors and lasers to show hour and minute.
Project in progress by Mr_Xu
BLYNK app based remote used to control a bot.
This tutorial will present a simple way to control directions of robot with two potentiometers and several wires.
by Pierre Ruffy & Roxane Alexandre
This lesson aims to show how an H bridge works.
Project tutorial by ambhatt
by Magesh Jayakumar
This device computes satellite positions and points to in real-time.
Project tutorial by Tashfi Nowroz
Or connect with your social account:
New here? Create an account