A very simple clock made with 2 Arduino nanos and two stepper motors.
Project showcase by garysat
You can remotely control your car with Bluetooth. Four settings are available: manual, automatic, steering and vocal control.
Project showcase by DANNY003
Hardware: Arduino Mega 2560 ; Gyroscope MPU6050 ; Bluetooth HC-06 ; Battery 12V ; MotorShield L293d Mobile App: RemoteXY
Project showcase by urzikh
Moves chess pieces around the board invisibly and seemingly magically.
Project showcase by Michael Guerero
A robo which follows an object of uniform color using Computer Vision.
Project showcase by Rohan Juneja
How to make a remote-controlled origami robot with Arduino.
Project showcase by isangmu
Convert an ordinary RC car into an extraordinary obstacle-avoiding robot.
Project showcase by VASILEIOS MOUGIOS
A robotic hand that emulate the movement of your hand wirelessly through a glove with sensors.
Project showcase by Gabry295
My kids love balloons, and they know that daddy is almighty. :)
Project showcase by Moofasta
This project involves extracting an EMG signal from two muscles of right hand and controlling a robotic arm based on the hand movements.
Project showcase by Shivanshu Pandey
Slider for medium camera, with programmable speed and paths.
Project showcase by Guiye Perez Bongiovanni
A robot that has ultrasonic sensors mounted on a basic servo to detect obstacles, swerve around them, and continue on a random path!
Project showcase by Xavier Tan
A 3D-printed, open source, Arduino-based, Bluetooth-controlled, Scratch-programmable, six-legged robot built for games, education, and fun!
Project showcase by Vorpal Robotics, LLC
Simple and faster solution for start control your model train via mobile app. Updated in April 2019 to 9 speeds and 122Hz PWM!
Project showcase by Steve Massikker
Code for driving a BLDC motor and adjusting its speed using a pot. This photo shows wires to a slipring in the hollow shaft of a BLDC motor.
Project showcase by mbarraus
This research was conducted focusing on the necessity of robots in our daily life.
Project showcase by Md Amirul Islam
Make your own simple polar CNC drawing machine.
Project showcase by Sandeep Sharma
A PID controlled line follower robot, named Elliot.
Project showcase by SMM2
A 2-in-1 CNC machine with both a rotary tool and a laser module.
Project showcase by Arnab Kumar Das
This is a cute linear stage that's about the size of a business card.
Project showcase by noboyu
This is a general purpose 3D-printed linear servo actuator (pusher style). Hope these save you some time on a future project!
Project showcase by potentprintables
AVR ATmega32A MCU based, DC Motors speed/position/timing controller/testing board for Stepper, Servo, Gear motors and programmable too.
Project showcase by Madao
KureBas V2.0 has manual mode and obstacle avoiding mode. He has a gripper, WiFi camera and new application that's produced for him.
Project showcase by KureBas Robotics
A super-sized version of our popular "Vorpal the Hexapod" project. Twice the size and ten times the fun! Scratch enabled for education.
Project showcase by vorpalrobotics
Or connect with your social account:
New here? Create an account