An Arduino Mini CNC pen plotter.
Project showcase by Kramick Saha
Traverse all path and find the shortest path from starting point to finish.
Project showcase by Team MusridhoRJ YantoF YudanarkoAA TriD
This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.
Project tutorial by adamsstephen
Cool robot that follows black line. Learn and make a line follower robot with PID controller in 2 hours.
Project tutorial by Team KittenBot
This project, known as Biotronics, was conceptualized to create synthetic species that are alive, aware, and conscious based on I.M.
Project in progress by ihacklab
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Project tutorial by utilstudio
An electronic sun-dancing sun tracker.
Project tutorial by SURYATEJA
Use l298 motor driver to control speed and direction of DC motor and show them in LCD.
Project in progress by ahmed soliman
A Bluetooth-enabled RC Car that uses Remote Arduino to allow another Windows device to control it.
Project tutorial by Windows IoT
Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.
Learn how to build a simple battle bot that can be controlled with a PS2 controller via Bluetooth.
Project tutorial by CodeDigs
We show you how to build a 2 axis laser turret aimed with a joystick.
Project in progress by Josh From BreakoutBros.com
Make a simple robotic arm which has master - slave control, and can record and play the moves.
Project tutorial by WolfxPac
A low cost turntable for photogrammetry acquisitions. Used by Department of Biology at University of Pisa to acquire 3D models of bones.
Project showcase by alfiosky4
It is an enclosed zen garden built into an end table.
Project tutorial by MakrToolbox
How to control an old RC Car using Arduino, an Arduino USB Host Shield and an XBOX360 wireless controller.
Project tutorial by Arduino_Scuola
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Project tutorial by Samira Peiris
Using servo motor control with a TV remote control.
Project showcase by eldo85
Have you ever wanted to be able to control a car with your hand? Introducing the Motion Mobile!
Project tutorial by mcharrison500
A flat pack, open source, robot arm, that you can build with nothing but a screwdriver and enthusiasm.
Project tutorial by Benjamin Gray
In this project capacitive touch sensing is used to actuate the 3D-printed hand.
Project tutorial by Amal Mathew
A PID controlled line follower robot, named Elliot.
Project showcase by SMM2
A homemade CNC machine for cutting PCBs.
Project tutorial by Rui Fernando Caldas
Use the Leap Motion to control tanks armed with Infrared LEDs and Infrared Sensors to do battle.
Project tutorial by Sean McCormick
Or connect with your social account:
New here? Create an account