My kids love balloons, and they know that daddy is almighty. :)
Project showcase by Moofasta
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
Control the pan and tilt of a camera with a 4-way joystick.
Project tutorial by ejshea
This project shows us how we control a "Micro Robot Car" and using a RF Remote Control with "Infineon 3D Magnetic Sensor 2Go".
Project tutorial by Guillermo Guillen
This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.
Project tutorial by Vishal soni
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.
Project in progress by Mihai Oltean
Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.
Project tutorial by Ron Dagdag
Control the speed of brushless DC motor using Arduino and Bluetooth module (HC-05).
Project tutorial by mohitmehlawat
A robot for children which helps to play and reduce addiction of smartphone.
Project tutorial by Md. Khairul Alam
Tito is a Bi-ped, dancing DIY robot, derivative from Zowi and Bob. Basically has been adapted to a standard Arduino UNO board.
Project tutorial by Camilo Parra Palacio
Arduino Robot Service Oriented Architecture - In this article we'll create a Service to control the L298N motor driver module.
Project tutorial by Nahuel Taibo
I have revamped the control system of this 20-year-old 5DOF articulated robotic arm with TP controls and programming interface integrated.
Project tutorial by Amit Nandi (BigWiz)
Creating a GPS-controlled, camera-equipped RC boat with an Arduino Mega and 433 MHz remote.
Project in progress by maboshi
An Autonomous Delivery System using the DonkeyCar which allows you to send or receive physical items, in a number of different scenarios.
Project tutorial by Abdullah Sadiq
A try to simulate the automation of modern manufacturing technologies specially the robotic arms that used in all fields of manufacturing.
Project tutorial by AhmedAzouz
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
by Dimitris Platis
This robot will avoid any obstacle that comes in its way and it's very easy to make.
Project showcase by xxx1997
This project will show you how to make a DIY 4-wheel robot that can be controlled using a smartphone via Dabble, a mobile application.
Project tutorial by STEMpedia
iRobbie is the revolutionary app that brings smartphone power to your Arduino project.
My project is a pocket sized robot arm you can control it by your smartphone.
by Mohammed Magdy
A solar panel that can rotate in two axis either automatically using four light sensors, either manually with the aid of two potentiometers.
Project tutorial by Giannis Arvanitakis
It's a low-cost and handmade robot with the mission to be attractive to the clients from businesses and help with the rate of services.
Project tutorial by Luis Eduardo Arenas Deseano
Or connect with your social account:
New here? Create an account