Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
I couldn't find an existing BLE Remote Control for an Arduino 101 Rover - this is my novel solution!
Project tutorial by shadeydave
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
Control the pan and tilt of a camera with a 4-way joystick.
Project tutorial by ejshea
This project shows us how we control a "Micro Robot Car" and using a RF Remote Control with "Infineon 3D Magnetic Sensor 2Go".
Project tutorial by Guillermo Guillen
This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.
Project tutorial by Team Vishal soni
Control the speed of your PWM fan easily. No need for other circuits.
Project tutorial by xXarduino_11Xx
A self-controlled robot with specific dimensions and features. It is also designed in hostile shapes which qualify it to fight.
Project tutorial by AhmedAzouz
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.
Project in progress by Mihai Oltean
Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.
Project tutorial by Ron Dagdag
Control the speed of brushless DC motor using Arduino and Bluetooth module (HC-05).
Project tutorial by mohitmehlawat
A robot for children which helps to play and reduce addiction of smartphone.
Project tutorial by Md. Khairul Alam
50 people and 6 robots sumo at IoT meetup.
Project showcase by Team Charlotte IoT
Tito is a Bi-ped, dancing DIY robot, derivative from Zowi and Bob. Basically has been adapted to a standard Arduino UNO board.
Project tutorial by Camilo Parra Palacio
The Critter is a simple Arduino walking robot that is fully 3D printed.
Project showcase by Slant Concepts
Arduino Robot Service Oriented Architecture - In this article we'll create a Service to control the L298N motor driver module.
Project tutorial by Nahuel Taibo
Ever want to control your RC car with an airplane remote? Here's how!
Project showcase by Gkid19
This project includes the design of a control system to control a three phase AC motor of a service elevator using an Arduino Mega 2560.
Project tutorial by Lasith Ishan Premaratne
Able to point in a specific direction or turn by degrees, this motor is a staple in home automation and robotics.
by Alex Glow
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Project tutorial by SurtrTech
I have revamped the control system of this 20-year-old 5DOF articulated robotic arm with TP controls and programming interface integrated.
Project tutorial by Amit Nandi (BigWiz)
Creating a GPS-controlled, camera-equipped RC boat with an Arduino Mega and 433 MHz remote.
Project in progress by maboshi
Or connect with your social account:
New here? Create an account