We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Project tutorial by Hacker Shack
An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
It can sketch accurately, you just have to upload the gcode of the image. Try it it's just awesome.
Project tutorial by Yogeshmodi
Tired of controlling your robot with a joystick? Ever thought of controlling it with your hands?
Project tutorial by Mayoogh Girish
"Otto DIY with steroids" + Bluetooth + APP + switch + touch sensors + strength + sound detection...
Project tutorial by Otto builders
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!
Project tutorial by Fredrik Stridsman
The making of a large 3D printer (400x400x400 mm) for a college project.
Project tutorial by Desi Engineer
It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......
Project tutorial by Arnab Kumar Das
This a mini CNC 2D plotter made from old DVD drive, L293D motor shield & Arduino.
Project tutorial by Sandeep Sharma
This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.
Project tutorial by Jithin Sanal
This project shows how to design a wi-fi remotely controlled two-wheeled robotic rover, using an Arduino Uno and an ESP8266.
Project tutorial by Igor Fonseca Albuquerque
"Rex, the Robot" will try finding how to scape from a "labyrinth" on the shortest and fastest way.
Project tutorial by MJRoBot
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
It's a basic 4-wheel drive car which can be controlled by Android phones.
How to make an Arduino 4WD RC Car with Joystick Controller (Arduino Uno | Joystick Shield | nRF24L01+PA+LNA).
Project tutorial by Andriy Baranov
Line Follower Robot with PID control, using an Android device to easily setup the main control parameters for better and fast loop tuning.
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by Team RobotGeek Projects Team
Simple robot to build, involve no pcb or proto board, no frames, just using a lot of glues.
Project tutorial by Martedi
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
Cool robot that follows black line. Learn and make a line follower robot with PID controller in 2 hours.
Project tutorial by KittenBot
Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.
Project tutorial by Arduino “having11” Guy
This project shows how you can build a car which can be controlled by your smartphone using an android application via Bluetooth.
Project tutorial by JANAK13
Android app control Arduino RC car via bluetooth.
Project tutorial by Rafi Rasheed T C
Or connect with your social account:
New here? Create an account