This project shows how you can build a car which can be controlled by your smartphone using an android application via Bluetooth.
Project tutorial by JANAK13
Simple controller for homemade (or commercial) antenna rotator. Manual command or USB via computer tracking software: Orbitron, SatPC32 ...
Project tutorial by viorelracoviteanu
This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
A quick tutorial on how the use the L298N Motor Controller with DC motors
by Ryan Chan
Let's take a break during navigation while Autopilot follows the route, control it with remote control!
Project tutorial by marcozonca
A robotic hand which mimics the gesture made by our hand.
Project tutorial by Rushabh Jain
Control a servo motor hand with the power of a glove and DIY flex sensors!
Project showcase by Laurence Lai
Jrobot Delivery is ready to deliver your next pizza!
Project showcase by joechen
A small car based on Arduino platform which can be controlled using Bluetooth and a Android app.
Project tutorial by Aniket Mindhe
Make a solar tracker using an Arduino and a 3D printer.
Project tutorial by Ingeimaks Ingeimaks
Object following robot
Project tutorial by mohammadsohail0008
Build your own line following robot (line follower) step by step easily by following this tutorial
Project tutorial by lightthedreams
Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.
Project tutorial by kelvineyeone
Cool robot that follows black line. Learn and make a line follower robot with PID controller in 2 hours.
Project tutorial by KittenBot
This is a smart wheelchair
Project tutorial by MakerBuddy
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Project tutorial by utilstudio
In this writeup, I'm going to tell you, how you can make a simple mimicking robotic arm using Arduino and Servo motors,
by Shubham Shinganapure
Open hardware/software test bench for solar tracker with virtual instrumentation.
Project tutorial by Saad Motahhir and Aboubakr_El Hammoumi
Gyro control in robots to hold direction
Project tutorial by neverofftheinternet
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Project tutorial by Hacker Shack
This project makes use of the preciseness of a laser beam, just one IR sensor and that good old arduino board to measure the RPM of motors.
Project tutorial by yashastronomy
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
This is a precise CNC router that I built to be as inexpensive as possible so that everyone can build it easily.
Project showcase by DAZ projects
Or connect with your social account:
New here? Create an account