I took a normal lawn tractor and added some motors, actuators, and electronics to make it remote-controlled.
Project in progress by Michael Rechtin
LIDIA is a Light Disinfecting Apparatus. It is used to quickly disinfect commercial spaces by contorting its geometry to concentrate light.
Project in progress by Team The 3D Engineers
An outdoor rover that patrols your garden.
Project in progress by Tygo-bear
Real-time artwork based on collected data.
Project in progress by Iva Jerabkova
Zakhar is a robotics UX project. The main aim is to decrease the anxiety of users interacting with a robot.
Project in progress by Andrei Gramakov
ATM is an Arduino based split flap display which aims to give users a satisfying tarot card reading experience.
Project in progress by i_mozy
Gesture control of a self-balancing robot using deep learning with TensorFlow Lite.
Project in progress by RolfK
This is the FIRST PART of my build of the Rover in the movie The Last Days On Mars.
Project in progress by Claude (science 3d)
Robot wirth stepper motor via microstepping, digital motion processing, auto tuning, cascaded PID controller with Joy Stick Control.
A simple Arduino/ESP32 crawler with PS4 BT remote control, but with 2x MCU and an advanced CAN-based communication ("drive-by-wire").
Project in progress by srolf
Robotic arm controlled by bluetooth controller.
Project in progress by Team Basso&Delmoro&Gramaglia
Developed over 4 years and 14,000 miles for enviolo (NuVinci) CVT hubs using reed switches and excepts power data for fully auto shifting.
Project in progress by erose
See how a 2-stroke engine works by using NeoPixels.
Project in progress by GerryHamilton
This is a model circuit that can control the speed and the direction of a dc motor without the h-bridge ( it's an alternative to h-bridge ).
Project in progress by Joao_Claro
This robot uses 4 Sharp IR sensors to wander around the house and avoid running into things.
Project in progress by mikesoniat
An attempt to achieve: 1. Shifter LEDs with RPM display 2. Manual gearbox sensing and display 3. CAN bus values forwarding to RaceChrono.
Project in progress by Ankel2000
Motor driver circuit with some power saving features.
Project in progress by Patel Darshil
Play tic-tac-toe against a robotic arm.
Project in progress by DANNY003
I making an Open Source Quadruped robot with Brushless Cycloidal Gearbox Actuator Joints with Absolute Encoder.
Project in progress by Gouldpa
WORK IN PROGRESS. Scriba is a printing robot which uses cameras to correct its trajectory and alignment.
Project in progress by RobinB
The Xenon controls itself to not by fins but by moving the motor at the bottom back and forth!
Project in progress by Cole Purtzer
Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.
Project in progress by Mihai Oltean
I made this RC car with an Arduino Uno, which I control via an HC-05 Bluetooth module. The project is now in its initial state.
Project in progress by Rafath Bin Zafar
The objective of this project is to control the ROBONOVA-1 and make a few steps whith it.
Project in progress by micho94
Or connect with your social account:
New here? Create an account