Let's take a break during navigation while Autopilot follows the route, control it with remote control!

An Arduino robot that can be controlled using speech or voice!

A simple interface for a homemade (or commercial) antenna rotator. Manual command or USB via computer tracking software - EasyComm protocol

Control the speed of your PWM fan easily. No need for other circuits.

This post shows how to control stepper motor speed and direction of rotation using Arduino UNO board and PS2 joystick.

6-axis robot arm built with hacked servos and 3D-printed parts demonstrating smooth inverse kinematic movements.

This is a smart wheelchair

This Robot can walk exercise and dance! how awesome!! :)

There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons

This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.

Two-wheel auto gear ENGINE is KILLED (off) when the sensor detects a child accelerate the vehicle or a vehicle falls down to avoid accident.

A programmable and highly maneuverable robotic cat for STEM education and AI-enhanced services.

Hello all, I hope you are doing good and safe. I'm here with another very cool project which you can build using some scrap/ used parts.

You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.

In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.

Mini 4WD Arduino robot controlled by Bluetooth.

Full procedure with theory explaining the concept behind a line follower robot

This project is a practical robotic arm that is stable, consistent and easy to use without motor shield or sensor shield. It has a low cost

Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...

This is my homemade CNC machine using Arduino, Easydrivers and old CD-Rom(s). I use Grbl and G-Code sender to execute the G-Code.

A quick tutorial on how the use the L298N Motor Controller with DC motors

The making of a large 3D printer (400x400x400 mm) for a college project.

Tangible Coding provides an opportunity for kids to become involved in programming with no screen used.

This project makes use of the preciseness of a laser beam, just one IR sensor and that good old arduino board to measure the RPM of motors.