Make a simple and programmable servo arm out of readily available materials!

Moves chess pieces around the board invisibly and seemingly magically.

A servo-driven lead screw using Arduino to calculate proper spindle and lead screw speeds for cutting English and metric threads with VFD.

A robotic catapult I threw together, with the ability to aim and fire!

A low-cost home robot that can do tasks around the house.

Feeling lonely in your DJ practices? This animatronic moves the head to the beat.

This smart car avoids obstacles: when the distance is less than 15 cm from itself, it will stop and make a decision where to move.

Image transmit and Control by Smartphone 4WD Robot Car over Bluetooth

An Arduino controlled car that avoids obstacles (ie. walls or objects in front of it).

[@version 1 ] PID loop is used in this project to control the speed of a permanent magnet DC motor.

Self-balancing robot with two ultrasonic proximity sensors and nRF24 communication + remote.

A desktop interactive 3D-printed Arduino social robotics kit for fun and STEM education.

Solar tracking photovoltaic (dual axis) that follows the sun, using LDR sensors and two DC motors.

You can remotely control your car with Bluetooth. Four settings are available: manual, automatic, steering and vocal control.

Construction of a prototype that mimics the movements of the human arm.

Our first wearable project (!) is an animatronic tail with dual-control. No animals harmed in the making of this project.

I 3D printed the parts for a Robotic Catapult

This research was conducted focusing on the necessity of robots in our daily life.

Who does not love gaming? Racing and fighting in the virtual world of PlayStation and Xbox! Let's bring that fun to real life!

This robotic arm can be controlled with computer mouse or it can make decisions by itself with Matlab vision system.

MeArm mounted on smart robot car controlled by 2 Arduino UNOs

Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.

This is a general purpose 3D-printed linear servo actuator (pusher style). Hope these save you some time on a future project!

A mini CNC 2D plotter made from old DVD drive and L293D motor shield. Very cheap but interesting. It can draw any image uploaded from PC.