This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.

An attempt to achieve: 1. Shifter LEDs with RPM display 2. Manual gearbox sensing and display 3. CAN bus values forwarding to RaceChrono.

A firefighter Arduino autonomous robot which is capable of detecting, approaching and extinguishing fire.

The Recon droid will detect the rebel scum and report back to the Empire. Control movement through Bluetooth or Wi-Fi.

A programmable and highly maneuverable robotic cat for STEM education and AI-enhanced services.

This is my next project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.

Play tic-tac-toe against a robotic arm.

Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor

Gesture control of a self-balancing robot using deep learning with TensorFlow Lite.

The idea is to create a functional Droideka from Star Wars, or at least something as close to it as possible!

The Xenon controls itself to not by fins but by moving the motor at the bottom back and forth!

I took a normal lawn tractor and added some motors, actuators, and electronics to make it remote-controlled.

Robotic arm controlled by bluetooth controller.

I made this RC car with an Arduino Uno, which I control via an HC-05 Bluetooth module. The project is now in its initial state.

LIDIA is a Light Disinfecting Apparatus. It is used to quickly disinfect commercial spaces by contorting its geometry to concentrate light.

An outdoor rover that patrols your garden.

Real-time artwork based on collected data.

We show you how to build a 2 axis laser turret aimed with a joystick.

Calculates the position of the sun relative to the trackers position on the earth and points the array at the sun.

ATM is an Arduino based split flap display which aims to give users a satisfying tarot card reading experience.

Creating a GPS-controlled, camera-equipped RC boat with an Arduino Mega and 433 MHz remote.

Use l298 motor driver to control speed and direction of DC motor and show them in LCD.

Zakhar is a robotics UX project. The main aim is to decrease the anxiety of users interacting with a robot.

Roombot is a room cleaning robot that moves around the room avoiding obstacles, picking up dust and wiping the floor.