It's a low-cost and handmade robot with the mission to be attractive to the clients from businesses and help with the rate of services.
Project tutorial by Luis Eduardo Arenas Deseano
We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Project tutorial by Hacker Shack
High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!
Project tutorial by Fredrik Stridsman
We will try to make a simple CNC machine with you.
Project tutorial by TheTNR
It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......
Project tutorial by Arnab Kumar Das
An unmanned ground vehicle, compatible with multi micro control. [OSHW] SA000001 | Certified open source hardware | oshwa.org/sa000001.html
Project tutorial by AhmedAzouz
Solder your PCBs using a DIY robotic arm.
This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.
Project tutorial by adamsstephen
Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.
Project tutorial by Arduino “having11” Guy
This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.
Project tutorial by 5 developers
Make a simple robotic arm which has master - slave control, and can record and play the moves.
Project tutorial by WolfxPac
My Dream humanoid robot where what we done in a room is done by a robot in the remote. First step is start from head.
Project tutorial by jegatheesan
Operate inaccessible and remote devices using a smart glove from anywhere on Earth.
Project tutorial by Team Nero
An automatic DIY photography turntable for all the techie photographers out there.
Project tutorial by circuito.io team
A version of the RC Car that uses Remote Arduino to allow a Windows device to control the motors without using an external motor shield.
Project tutorial by 4 developers
Use PHP and MySQL to control a machine that will retrieve parts so you no longer have to dig for that 330 ohm resistor!
Python does the image processing, Arduino controls the servos.
If you have this car, you will be able to avoid obstacles and follow the necessary lines to reach your destination and protect the distances
A relatively easy to build and quite cheap robotic arm.
Project tutorial by Mirko Pavleski
This robotic arm mimics hand motion and works using sensor and moves accordingly. Can be used in industry for welding and various jobs.
Project tutorial by Ashwini kumar sinha
Control your robotic arm from long distance using Ethernet.
Project tutorial by Md. Khairul Alam
This lesson, aims to show how to to control a servo using virtual buttons on an interface created by the Anniken Andee Shield!
Project tutorial by Arduino_Scuola
This project uses the capabilities of the gen4-uLCD-43DT to collaborate with diverse platforms such as Arduino and HC-05 Bluetooth Module.
Project tutorial by 4D Makers
A light-tracking turret based on two stepper motors - can rotate about 90 degrees in the vertical and 180 degrees in the horizontal plane.
Project tutorial by CesareBrizio
Or connect with your social account:
New here? Create an account