We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.

High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!

It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......

This a mini CNC 2D plotter made from old DVD drive, L293D motor shield & Arduino.

A laser-cut robot kitten that runs and learns from you.

Polar drawing machine built with fischertechnik and Arduino. Thanks to a G-code interpreter, it can draw any bitmap or vector graphics.

LQ control of Ball and Plate system controlled by Arduino MEGA 2560.

The tank that will follow you and serve you beer. Coolness is over 9000!

Caravaggio is a drawing machine able to replicate a digital image using a pen and a continuous line.

A walking four legged robot "mammal style." 3DOF legs, IR receiver all connected to a Pro Mini. Material cost less than $100.

Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.

MeArm mounted on smart robot car controlled by 2 Arduino UNOs

We will try to make a simple CNC machine with you.

This is 3-axis CNC plotter/engraver based on GRBL software and 2020 aluminum extrusions. Low-cost engraving and PCB manufacturing dual side.

Arduino UNO-compatible robotic simulation of the C. elegans nematode.

A wearable robotic owl familiar. Archimedes judges your emotions, via Google AIY.

Build a voice-controlled robot! You will use Amazon Echo, Alexa, Heroku, Google Firebase, Android, and of course Arduino. Lots of fun!

Mobile-controlled CNC plotter.

This robotic arm can be controlled with computer mouse or it can make decisions by itself with Matlab vision system.

This project shows how to simulate a simple closed-loop control algorithm in Simulink and how to run it on an Arduino Mega 2560 board.

A tiny telegraph that can write any text messages that look like a telegrammes. This project made of oak plywood.

This robot took part in a competition and solved the maze.

An automatic DIY photography turntable for all the techie photographers out there.

The idea is to create a functional Droideka from Star Wars, or at least something as close to it as possible!