We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.

It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......

High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!

This a mini CNC 2D plotter made from old DVD drive, L293D motor shield & Arduino.

The tank that will follow you and serve you beer. Coolness is over 9000!

A walking four legged robot "mammal style." 3DOF legs, IR receiver all connected to a Pro Mini. Material cost less than $100.

Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.

We will try to make a simple CNC machine with you.

This is 3-axis CNC plotter/engraver based on GRBL software and 2020 aluminum extrusions. Low-cost engraving and PCB manufacturing dual side.

Build a voice-controlled robot! You will use Amazon Echo, Alexa, Heroku, Google Firebase, Android, and of course Arduino. Lots of fun!

This project shows how to simulate a simple closed-loop control algorithm in Simulink and how to run it on an Arduino Mega 2560 board.

An automatic DIY photography turntable for all the techie photographers out there.

This project includes the design of a control system to control a three phase AC motor of a service elevator using an Arduino Mega 2560.

Build a voice-controlled Arduino robot. You will use your own Android phone (powered by Google Cloud Services) to control it. Lots of fun!

A try to simulate the automation of modern manufacturing technologies specially the robotic arms that used in all fields of manufacturing.

An Alexa controlled robot that can perform tasks autonomously. It can feed your fish or program it to perform pick and place operations.

An unmanned ground vehicle, compatible with multi micro control. [OSHW] SA000001 | Certified open source hardware | oshwa.org/sa000001.html

A version of the RC Car that uses Remote Arduino to allow a Windows device to control the motors without using an external motor shield.

My new created machine to clean glass roofs.

Wolf is an IoT multi-terrain robot running on the Arduino 101 platform.

This is first version of my low cost 3d printed robot arm based on Ikea Tertial lamp.

An Autonomous Delivery System using the DonkeyCar which allows you to send or receive physical items, in a number of different scenarios.

Want a cool spider-like robot to wear around and impress your friends? Well, this is the bot for you!

Solder your PCBs using a DIY robotic arm.