An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
An electronic sun-dancing sun tracker.
Project tutorial by SURYATEJA
Let's disassemble one RC toy car, racking its main parts, replacing the original embedded electronics by an Arduino.
Project tutorial by MJRoBot
You will learn how to make a servo move with an ir remote control and the degree measurement you will see on the lcd display!
Project tutorial by razangry1731
Today I will show you how to make eating robot with Arduino Nano. This project I made for my daughter. It's very easy with cheap materials.
Project tutorial by GoldScrew
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!
Project tutorial by Danny van den Brande
Make your own walking humanoid robot out of Lego and 3D printed parts powered by Arduino Nano, off-the-shelf DC gear-motor and NeoPixel LED.
Project tutorial by Tart Robotics
line following robot setup using an L298N motor driver with an Arduino and two proximity sensor modules.
Project tutorial by Arnov Sharma
This project will show you how to make a laser turret.
Project tutorial by MisterBotBreak
Stuffed toy with MP3 module, speaker, servo and piezoelectric sensor that nods to music.
Project tutorial by Stefan Vasic
Hang your robot from a zipline across the hall. Then, control your robot by clapping using an Arduino and a microphone sensor.
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
MeArm robot with using board MeArm v1.6.1 with recording of movemens and with infrared remote controller possibility.
Project tutorial by utilstudio
Objective of the Swarm-bots project is to study controlling the bot so assemble themselves, avoid obstacle and synchronization between bots.
Project tutorial by Team Hermes
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
It's a BLDC motor based jet turbine.
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
How do you tell the difference between a fall and a sudden, normal movement? Train a machine learning model to detect when a fall occurs.
Project tutorial by Arduino “having11” Guy
Let's learn how to control a Roomba Robot via its serial port and how to command its motors, LEDS , etc.
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
When my ultrasound sensor stopped working, I decided to improvise by making an obstacle avoidance bot using IR sensors (cheaper too).
Project tutorial by Chandran N
A programmable 6-legged robot with Lego, Arduino, and two off-the-shelf DC gear-motors for project-based STEM learning.
A basic robot using Arduino.
Project tutorial by Renga
Or connect with your social account:
New here? Create an account