Arduino-Android car controlled via Bluetooth module.
Design of an Indicative Featured and Speed Controlled Obstacle Avoiding Robot.
Project showcase by Maverick
Electronic Arm Prosthesis
*Carolina Proaño Photo
Project tutorial by Team Inti Condo
Drive a bipolar stepper motor with the EVALSP820 -XS and Arduino Mega 2560.
Project showcase by microst
This project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.
Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor
Project in progress by ashleyblack
Robot arms are awesome! In this tutorial we explore how to control one of them using a Nunchuk and an Arduino Mega.
Project tutorial by Igor Fonseca Albuquerque
Really simple robot platform that can find it's own way around obstacles
Project tutorial by au_chrismor
A panel to control the pitch of a wing (or aircraft or control surface deflection) in a small wind tunnel.
Project tutorial by dancili
What if a regular M&M's dispenser was changed to automatically serve the chocolate candies? Let's go for it!
Project showcase by Marcelo Ávila de Oliveira
we performed the control of the stepper motor in the forward and backward directions along the x axis with the joystick
by Team Arduino Applications
Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.
This creates a rotating platform for displays.
Project tutorial by Ingo Lohs
An Arduino controlled car that avoids obstacles (ie. walls or objects in front of it).
Project showcase by Adam
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
The Critter is a simple Arduino walking robot that is fully 3D printed.
Project showcase by Slant Concepts
This project is an awesome Bluetooth robot that you can have fun with!
Project showcase by aip06
A remote control car controlled with a steering wheel using mpu6050 sensor and rf434.
Project showcase by Aritra_B
This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.
Project tutorial by Team Vishal soni
Detect obstacles through ultrasonic sensors and then avoid them.
by Ishaq Yang
AVR ATmega32A MCU based, DC Motors speed/position/timing controller/testing board for Stepper, Servo, Gear motors and programmable too.
Project showcase by Shahariar
My first project in Arduino platform. I combined two features in this project, Bluetooth control mode and obstacle avoiding mode.
Project showcase by KureBas Robotics
The LittleBot is a simple 3D printed Arduino robot for kids to get introduced to STEM.
This smart car avoids obstacles: when the distance is less than 15 cm from itself, it will stop and make a decision where to move.
Or connect with your social account:
New here? Create an account