Avoid conflict with other libraries, use ServoTimer2 and run servo motors with ease.
Project tutorial by ashraf_minhaj
This is our new Bluetooth RC car - based on our favorite Arduino Uno!
Project tutorial by ardumotive
A walking insect looking thing made from leftovers.
Project tutorial by Jeremie
This robot uses 4 Sharp IR sensors to wander around the house and avoid running into things.
Project in progress by mikesoniat
Cute little DIY project using 8x8 LED matrix module and nRF24L01.
Project tutorial by Hung-Che
It's an arm that can move and pick up some things.
Project tutorial by tRee
A robot which is controlled by an HC-05 module and receives commands using a Bluetooth terminal app.
Project showcase by Chandran N
I made this RC car with an Arduino Uno, which I control via an HC-05 Bluetooth module. The project is now in its initial state.
Project in progress by Rafath Bin Zafar
I have a little paint booth in my shop, so I created a device to shake paint cans for me.
Project tutorial by MakrToolbox
A panel to control the pitch of a wing (or aircraft or control surface deflection) in a small wind tunnel.
Project tutorial by dancili
This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.
Project tutorial by Jithin Sanal
With this project, you can remotely control your car with Bluetooth.
Project tutorial by Mehmet SARI
Project tutorial by sharma_himanshu
In this tutorial, you will learn how to drive DC, stepper and servo motors using an Arduino L293D motor driver shield.
PV panel simulation for tracking solar movement.
Project tutorial by Fikret
Ever wanted to control a cockroach on the cheap? Now you can!
Project tutorial by bravoechonovember
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.
Project tutorial by Vishal soni
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
The Critter is a simple Arduino walking robot that is fully 3D printed.
Project showcase by Slant Concepts
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
by Dimitris Platis
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
by Ingo Lohs
Or connect with your social account:
New here? Create an account