Learn how to set up the Dagu Rover 5 using this step-by-step tutorial.
by Herbie Ashworrth
What you need to control the motors of your robot? H-Bridge is the magic word!
What if a regular M&M's dispenser was changed to automatically serve the chocolate candies? Let's go for it!
Project showcase by Marcelo Ávila de Oliveira
A panel to control the pitch of a wing (or aircraft or control surface deflection) in a small wind tunnel.
Project tutorial by dancili
Have you ever wanted to be able to control a car with your hand? Introducing the Motion Mobile!
Project tutorial by mcharrison500
You can use different appliances. This project will turn the DC motor on or off by clapping.
Project tutorial by Nakshatra401
This is a cute linear stage that's about the size of a business card.
Project showcase by noboyu
It's an Arduino-based robot which brings food from the kitchen to my room.
Project tutorial by Arnov Sharma
Using gesture recognition technology to open door locks.
Project tutorial by AdhamN
Cute little DIY project using 8x8 LED matrix module and nRF24L01.
Project tutorial by Hung-Che
This simple optical chopper periodically interrupts an external beam of light, useful for photoelectrochemistry.
Project tutorial by Brendan Sweeny
Electronic Arm Prosthesis
*Carolina Proaño Photo
Project tutorial by Inti Condo
The idea is to upgrade my rover to be controlled by a Blynk app in my mobile. The Blynk is talking to my Arduino UNO using Bluetooth HC06.
Project showcase by Rafa Juárez
This project is saving time for all parents who hate to change batteries or other mechanisms for the merry-go-round above their baby's bed.
Project showcase by ivanzlatni
A remote control car controlled with a steering wheel using mpu6050 sensor and rf434.
Project showcase by Aritra_B
line following robot setup using an L298N motor driver with an Arduino and two proximity sensor modules.
This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors
Project tutorial by comptek4
Two-wheel auto gear ENGINE is KILLED (off) when the sensor detects a child accelerate the vehicle or a vehicle falls down to avoid accident.
This creates a rotating platform for displays.
Project tutorial by Ingo Lohs
A simple obstacle avoiding robot with 3D-printed and salvaged parts.
I built a leg with Arduino and with ice cream sticks!
Project showcase by fmattiussi
This ball mill was made for grinding sand and cleaning objects like rusty bolts.
Project showcase by tinkersprojects
The simplest Arduino-based drawing car ever.
Project tutorial by Jonathan Morales Vélez
Project tutorial by sharma_himanshu
Or connect with your social account:
New here? Create an account