Motor driver circuit with some power saving features.
Project in progress by Patel Darshil
An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor
Project in progress by ashleyblack
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
A simple way to control a motor with a potentiometer and an Arduino.
by Benjamin Larralde
Design of an Indicative Featured and Speed Controlled Obstacle Avoiding Robot.
Project showcase by Maverick
Here is a step by step guide to making a "crawler robot."
Project tutorial by MEGA DAS
My first project in Arduino platform. I combined two features in this project, Bluetooth control mode and obstacle avoiding mode.
Project showcase by KureBas Robotics
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
The Critter is a simple Arduino walking robot that is fully 3D printed.
Project showcase by Slant Concepts
How to use a Servo.
It's a BLDC motor based jet turbine.
Project tutorial by Arnov Sharma
A walking insect looking thing made from leftovers.
Project tutorial by Jeremie
A basic robot using Arduino.
Project tutorial by Renga
Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!
Project tutorial by Danny van den Brande
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
Control an Arduino robot with a smartphone using ESP8266.
In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.
Project tutorial by Mark Tashiro
Objective of the Swarm-bots project is to study controlling the bot so assemble themselves, avoid obstacle and synchronization between bots.
Project tutorial by Team Hermes
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
Or connect with your social account:
New here? Create an account