An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.
Project tutorial by Jithin Sanal
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by Team RobotGeek Projects Team
Project showcase by Team Maverick
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
by Team RobotGeek Projects Team
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
Detect obstacles through ultrasonic sensors and then avoid them.
by Ishaq Yang
This tutorial guides you through using 1Sheeld, Arduino and an Android phone to make an RC robot car at a glance.
Project tutorial by Garry Gerwer and Ahmed Hamdy
This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.
Project tutorial by Team Vishal soni
Connect 2 Stepper Motors to Arduino and control them with Joystick - Quick and Easy!
Project tutorial by Boian Mitov
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
Project tutorial by MEGA DAS
Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
How to use a Servo.
The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.
by Ingo Lohs
Most 6DoF robotic arms come with a control board with RS-232 for desktop control, we adapt the control for use with android devices simply.
Project in progress by Team Mans
This is a small robot car which can be controlled over Bluetooth using Android devices.
Project showcase by S.Ranjith Reddy
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
by Dimitris Platis
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
Or connect with your social account:
New here? Create an account