This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
Learn how to control Lego motors and servos with your Arduino and build your own Android app to remote control your model.
Project tutorial by Patrick Müller
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
Design of an indicative featured and speed controlled obstacle avoiding robot.
Project tutorial by Team Maverick
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.
Project tutorial by kelvineyeone
Let's disassemble one RC toy car, racking its main parts, replacing the original embedded electronics by an Arduino.
Project tutorial by MJRoBot
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by RobotGeek Projects Team
A flat pack, open source, robot arm, that you can build with nothing but a screwdriver and enthusiasm.
Project tutorial by Benjamin Gray
This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.
Project tutorial by Vishal soni
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!
Project tutorial by Danny van den Brande
In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.
Project tutorial by Mark Tashiro
Open hardware/software test bench for solar tracker with virtual instrumentation.
Project tutorial by Saad Motahhir and Aboubakr_El Hammoumi
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Project tutorial by SurtrTech
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
This tutorial guides you through using 1Sheeld, Arduino and an Android phone to make an RC robot car at a glance.
Project tutorial by Garry Gerwer and Ahmed Hamdy
Let's learn how to control a Roomba Robot via its serial port and how to command its motors, LEDS , etc.
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Project tutorial by utilstudio
CNC machine control with GRBL breakout board for Arduino Uno.
Project tutorial by CNC Design
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Project tutorial by Samira Peiris
Or connect with your social account:
New here? Create an account