Learn how to make a simple line follower robot by using Arduino and very basic electronic components. It is a fully autonomous robot.
by Shubham Shinganapure
Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.
Project tutorial by kelvineyeone
The simplest Arduino-based drawing car ever.
Project tutorial by Jonathan Morales Vélez
I made this RC car with an Arduino Uno, which I control via an HC-05 Bluetooth module. The project is now in its initial state.
Project in progress by Rafath Bin Zafar
Let's make a fully autonomous robot using Arduino and IR sensors. It can explore the surface of a table without falling!
This project will show you how to make a laser turret.
Project tutorial by MisterBotBreak
When my ultrasound sensor stopped working, I decided to improvise by making an obstacle avoidance bot using IR sensors (cheaper too).
Project tutorial by Chandran N
A robot which is controlled by an HC-05 module and receives commands using a Bluetooth terminal app.
Project showcase by Chandran N
A line follower bot which can detect gas leaks and high temperature in a typical household and raise an alarm.
Project showcase by Team HomeSafety
Awesome gesture controlled robot tutorial using Arduino and PAJ7620 sensor.
Project tutorial by Jithin Sanal
In this tutorial, you will learn how to drive DC, stepper and servo motors using an Arduino L293D motor driver shield.
A simple obstacle avoiding robot with 3D-printed and salvaged parts.
Project tutorial by Arnov Sharma
You can use different appliances. This project will turn the DC motor on or off by clapping.
Project tutorial by Nakshatra401
In this project, I will teach you how to make an obstacle avoiding robot that works with Arduino.
Project tutorial by Aarav Garg
It's a BLDC motor based jet turbine.
This is a cute linear stage that's about the size of a business card.
Project showcase by noboyu
Easy to build instructions for making the new Nematoduino mk2, an Arduino Uno-compatible robotic simulation of the C. elegans nematode.
Project tutorial by Nathan Griffith
This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors
Project tutorial by comptek4
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
by Dimitris Platis
The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.
by Ingo Lohs
LASER tank controlled by a PS2 wireless controller and you "fire" the LASER turret remotely too.
Project tutorial by SurtrTech
Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.
Project showcase by potentprintables
This is a general purpose 3D-printed linear servo actuator (pusher style). Hope these save you some time on a future project!
MeArm robot with using board MeArm v1.6.1 with recording of movemens and with infrared remote controller possibility.
Project tutorial by utilstudio
Or connect with your social account:
New here? Create an account