Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!
Project tutorial by Danny van den Brande
Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.
Project tutorial by kelvineyeone
Let's make a fully autonomous robot using Arduino and IR sensors. It can explore the surface of a table without falling!
Project tutorial by Shubham Shinganapure
Learn how to make a simple line follower robot by using Arduino and very basic electronic components. It is a fully autonomous robot.
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
LASER tank controlled by a PS2 wireless controller and you "fire" the LASER turret remotely too.
Project tutorial by SurtrTech
It's an Arduino-based robot which brings food from the kitchen to my room.
Project tutorial by Arnov Sharma
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
With this project, you can remotely control your car with Bluetooth.
Project tutorial by Mehmet SARI
With the Auto-Turret Project, you can automatically track down and fire upon your enemies! This project utilizes a Pixy camera module.
Project tutorial by RobotGeek Projects Team
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Project tutorial by Samira Peiris
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
We used The Tactigon to control an Arduino-powered robot via BLE. Moving The Tactigon as a 3D steering wheel is awesome!
Project tutorial by Team the tactigon team
In this project, I will teach you how to make an obstacle avoiding robot that works with Arduino.
Project tutorial by Aarav Garg
CNC machine control with GRBL breakout board for Arduino Uno.
Project tutorial by CNC Design
A flat pack, open source, robot arm, that you can build with nothing but a screwdriver and enthusiasm.
Project tutorial by Benjamin Gray
This is how to control Robot Arm using Mobile Application which is really cool, have fun and please give me feed back.
Project tutorial by Ammar Atef Ali
Using the Actobotics Runt Rover Peewee chassis kit and an Arduino controller, motor driver and sensors from eBay or other vendors.
Project tutorial by Scott Beasley
Objective of the Swarm-bots project is to study controlling the bot so assemble themselves, avoid obstacle and synchronization between bots.
Project tutorial by Team Hermes
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
Awesome gesture controlled robot tutorial using Arduino and PAJ7620 sensor.
Project tutorial by Jithin Sanal
This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors
Project tutorial by comptek4
Project tutorial by sharma_himanshu
Or connect with your social account:
New here? Create an account