This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
In this tutorial, you will learn how to drive DC, stepper and servo motors using an Arduino L293D motor driver shield.
A quick tutorial on how the use the L298N Motor Controller with DC motors
by Ryan Chan
Learn how to control Lego motors and servos with your Arduino and build your own Android app to remote control your model.
Project tutorial by Patrick Müller
An Arduino controlled car that avoids obstacles (ie. walls or objects in front of it).
Project showcase by Team Adam
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.
Project tutorial by Jithin Sanal
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
Here is a step by step guide to making a "crawler robot."
Project tutorial by DIY GUY Chris
Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor
Project in progress by ashleyblack
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
by RobotGeek Projects Team
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
Design of an indicative featured and speed controlled obstacle avoiding robot.
Project tutorial by Team Maverick
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.
Project tutorial by kelvineyeone
Let's disassemble one RC toy car, racking its main parts, replacing the original embedded electronics by an Arduino.
Project tutorial by MJRoBot
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.
by Ingo Lohs
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by Team RobotGeek Projects Team
Detect obstacles through ultrasonic sensors and then avoid them.
by Ishaq Yang
Or connect with your social account:
New here? Create an account