An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
Learn how to control Lego motors and servos with your Arduino and build your own Android app to remote control your model.
Project tutorial by Patrick Müller
This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.
Project tutorial by Jithin Sanal
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by Team RobotGeek Projects Team
Diversity Adaptive Obstacle Avoiding Robot
Project showcase by Team Maverick
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
by Team RobotGeek Projects Team
A flat pack, open source, robot arm, that you can build with nothing but a screwdriver and enthusiasm.
Project tutorial by Benjamin Gray
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
A simple way to control a motor with a potentiometer and an Arduino.
by Benjamin Larralde
In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.
Project tutorial by Mark Tashiro
Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor
Project in progress by ashleyblack
Able to point in a specific direction or turn by degrees, this motor is a staple in home automation and robotics.
by Alex Glow
Detect obstacles through ultrasonic sensors and then avoid them.
by Ishaq Yang
The Critter is a simple Arduino walking robot that is fully 3D printed.
Project showcase by Slant Concepts
This tutorial guides you through using 1Sheeld, Arduino and an Android phone to make an RC robot car at a glance.
Project tutorial by Garry Gerwer and Ahmed Hamdy
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
Here is a step by step guide to making a "crawler robot."
Project tutorial by MEGA DAS
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
by Boian Mitov
Small four wheeled bots are fun to build and play with, but offer a new set of challenges for the beginner. With the addition of two more...
Project tutorial by Scott Beasley
Connect 2 Stepper Motors to Arduino and control them with Joystick - Quick and Easy!
Project tutorial by Boian Mitov
Or connect with your social account:
New here? Create an account