An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
Learn how to control Lego motors and servos with your Arduino and build your own Android app to remote control your model.
Project tutorial by Patrick Müller
This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.
Project tutorial by Jithin Sanal
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
Here is a step by step guide to making a "crawler robot."
Project tutorial by DIY GUY Chris
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
Design of an indicative featured and speed controlled obstacle avoiding robot.
Project tutorial by Team Maverick
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.
Project tutorial by kelvineyeone
Let's disassemble one RC toy car, racking its main parts, replacing the original embedded electronics by an Arduino.
Project tutorial by MJRoBot
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by Team RobotGeek Projects Team
This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.
Project tutorial by Vishal soni
A flat pack, open source, robot arm, that you can build with nothing but a screwdriver and enthusiasm.
Project tutorial by Benjamin Gray
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
Open hardware/software test bench for solar tracker with virtual instrumentation.
Project tutorial by Saad Motahhir and Aboubakr_El Hammoumi
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!
Project tutorial by Danny van den Brande
In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.
Project tutorial by Mark Tashiro
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Project tutorial by SurtrTech
Connect 2 Stepper Motors to Arduino and control them with Joystick - Quick and Easy!
Project tutorial by Boian Mitov
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
Or connect with your social account:
New here? Create an account