An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.

Make a simple and programmable servo arm out of readily available materials!

This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.

Design of an indicative featured and speed controlled obstacle avoiding robot.

This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.

Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.

In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!

The Critter is a simple Arduino walking robot that is fully 3D printed.

Here is a step by step guide to making a "crawler robot."

In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.

In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.

Able to point in a specific direction or turn by degrees, this motor is a staple in home automation and robotics.

A simple way to control a motor with a potentiometer and an Arduino.

Learn how to control Lego motors and servos with your Arduino and build your own Android app to remote control your model.

You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.

There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons

Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2

An Arduino controlled car that avoids obstacles (ie. walls or objects in front of it).

Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...

Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!

A super simple stair climbing robot.

How to use a Servo.

Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.

In this low-cost project, you can learn fun stuff like laser cutting, coding, mechanics, trigonometry. No Arduino codes required!