An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
Design of an indicative featured and speed controlled obstacle avoiding robot.
Project showcase by Team Maverick
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by Team RobotGeek Projects Team
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
The Critter is a simple Arduino walking robot that is fully 3D printed.
Project showcase by Slant Concepts
Here is a step by step guide to making a "crawler robot."
Project tutorial by MEGA DAS
In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.
Project tutorial by Mark Tashiro
Learn how to control Lego motors and servos with your Arduino and build your own Android app to remote control your model.
Project tutorial by Patrick Müller
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
Able to point in a specific direction or turn by degrees, this motor is a staple in home automation and robotics.
by Alex Glow
A simple way to control a motor with a potentiometer and an Arduino.
by Benjamin Larralde
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
by Boian Mitov
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
by Ingo Lohs
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
In this low-cost project, you can learn fun stuff like laser cutting, coding, mechanics, trigonometry. No Arduino codes required!
Project tutorial by KittenBot
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Project tutorial by SurtrTech
How to use a Servo.
An Arduino controlled car that avoids obstacles (ie. walls or objects in front of it).
Project showcase by Team Adam
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
Or connect with your social account:
New here? Create an account