Two-wheel auto gear ENGINE is KILLED (off) when the sensor detects a child accelerate the vehicle or a vehicle falls down to avoid accident.

With this simple Arduino project, you can servo motor using a remote control.

An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.

This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.

Make a simple and programmable servo arm out of readily available materials!

In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!

This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.

[Title]

Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor

A simple way to control a motor with a potentiometer and an Arduino.

Here is a step by step guide to making a "crawler robot."

My first project in Arduino platform. I combined two features in this project, Bluetooth control mode and obstacle avoiding mode.

Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.

The Critter is a simple Arduino walking robot that is fully 3D printed.

How to use a Servo.

Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.

It's a BLDC motor based jet turbine.

A walking insect looking thing made from leftovers.

Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!

Control an Arduino robot with a smartphone using ESP8266.

In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.

Objective of the Swarm-bots project is to study controlling the bot so assemble themselves, avoid obstacle and synchronization between bots.

A super simple stair climbing robot.

Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!