Two-wheel auto gear ENGINE is KILLED (off) when the sensor detects a child accelerate the vehicle or a vehicle falls down to avoid accident.

An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.

This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.

With this simple Arduino project, you can servo motor using a remote control.

Make a simple and programmable servo arm out of readily available materials!

In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!

This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.

[Title]

Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor

A simple way to control a motor with a potentiometer and an Arduino.

Here is a step by step guide to making a "crawler robot."

My first project in Arduino platform. I combined two features in this project, Bluetooth control mode and obstacle avoiding mode.

Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.

The Critter is a simple Arduino walking robot that is fully 3D printed.

How to use a Servo.

Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.

It's a BLDC motor based jet turbine.

A walking insect looking thing made from leftovers.

Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!

Control an Arduino robot with a smartphone using ESP8266.

In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.

Objective of the Swarm-bots project is to study controlling the bot so assemble themselves, avoid obstacle and synchronization between bots.

A super simple stair climbing robot.

Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!