This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
A quick tutorial on how the use the L298N Motor Controller with DC motors
by Ryan Chan
The car is moving by two dc motors and turn by setting one motor over bluetooth using Android App on Andriod phone.
Project showcase by S.Ranjith Reddy
This project is all about "How to build a arduino robot". this arduino robot called Otto robot.
Build your own line following robot (line follower) step by step easily by following this tutorial
Project tutorial by lightthedreams
Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.
Project tutorial by kelvineyeone
The LittleArm 2C is a 3D printed, Bluetooth-controlled, Arduino robot arm designed for STEM
Project tutorial by Slant Concepts
Here is a step by step guide to making a "crawler robot."
Project tutorial by DIY GUY Chris
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Project tutorial by utilstudio
Teaches you how to use the Stepper motor and driver in the Arduino Grove Starter Kit.
In this writeup, I'm going to tell you, how you can make a simple mimicking robotic arm using Arduino and Servo motors,
by Shubham Shinganapure
Open hardware/software test bench for solar tracker with virtual instrumentation.
Project tutorial by Saad Motahhir and Aboubakr_El Hammoumi
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
4 wheel steering rear servo controlled by throttle forward percentage and steering width plus directional blinking led.
Project tutorial by wrighi
This project makes use of the preciseness of a laser beam, just one IR sensor and that good old arduino board to measure the RPM of motors.
Project tutorial by yashastronomy
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.
Project tutorial by Team Vishal soni
This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors
Project tutorial by comptek4
Learn how to make a simple line follower robot by using Arduino and very basic electronic components. It is a fully autonomous robot.
Project tutorial by Shubham Shinganapure
A robot that moves based on the hand gestures
Project tutorial by Ashwin S and Harish K
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.
by Muhammad Anas
Awesome gesture controlled robot tutorial using Arduino and PAJ7620 sensor.
Project tutorial by Jithin Sanal
Control a DC motor's speed and direction via Bluetooth through a mobile app.
Project tutorial by eliott3005
Or connect with your social account:
New here? Create an account