This is a precise CNC router that I built to be as inexpensive as possible so that everyone can build it easily.
Project showcase by DAZ projects
Image transmit and Control by Smartphone 4WD Robot Car over Bluetooth
Project showcase by Alf81010
A servo-driven lead screw using Arduino to calculate proper spindle and lead screw speeds for cutting English and metric threads with VFD.
Project showcase by Nick Romeo
This is a 3D-Printed hand that is controlled by servos and flex sensors.
Project showcase by Conner Caruso and Elliot Hicks
This project uses Arduino as the controller of robots, cameras, and motor drivers to control propeller motion.
Project showcase by Sistem Komputer STMIK-AUB Surakarta
This project is about a Pan-Tilt controlled by cell phone via Bluetooth and using 1Sheeld.
Project showcase by LAGSILVA
The Arduino Engineering Kit's rover just got cooler. It can be controlled like an RC car using your Android phone.
Project showcase by metrowest_aug
KureBas V2.0 has manual mode and obstacle avoiding mode. He has a gripper, WiFi camera and new application that's produced for him.
Project showcase by KureBas Robotics
Moves chess pieces around the board invisibly and seemingly magically.
Project showcase by Michael Guerero
[@version 1 ] PID loop is used in this project to control the speed of a permanent magnet DC motor.
Project showcase by tareqwaleed1996
Self-balancing robot with two ultrasonic proximity sensors and nRF24 communication + remote.
Project showcase by Debreczeni Tamas
A desktop interactive 3D-printed Arduino social robotics kit for fun and STEM education.
Project showcase by Slant Concepts
Solar tracking photovoltaic (dual axis) that follows the sun, using LDR sensors and two DC motors.
Project showcase by DemetrisEng
You can remotely control your car with Bluetooth. Four settings are available: manual, automatic, steering and vocal control.
Project showcase by DANNY003
Construction of a prototype that mimics the movements of the human arm.
Project showcase by zezarandrade
I 3D printed the parts for a Robotic Catapult
Project showcase by tvtig
This research was conducted focusing on the necessity of robots in our daily life.
Project showcase by Md Amirul Islam
Who does not love gaming? Racing and fighting in the virtual world of PlayStation and Xbox! Let's bring that fun to real life!
Project showcase by Jasmeet Singh
A mini CNC 2D plotter made from old DVD drive and L293D motor shield. Very cheap but interesting. It can draw any image uploaded from PC.
Project showcase by Mrinnovative
An Android-control(BT) system is added in a motor toy boat and it can go any direction slowly.
Project showcase by joeydream
Bring down the technical and cost barriers of dynamic quadruped robot to a DIY pet.
Project showcase by Rongzhong Li (李荣仲)
Update of the PENXZYL 3.0 project, with a new base and modified head and brush. Drawing a SATOR square. #TENET
Project showcase by Guiye Perez Bongiovanni
Wanted to over-engineer a more efficient way to be lazy. Thus, I made a machine that folds my shirts (mostly) at the push of a button!
Project showcase by typalowski
A mini CNC machine made out of cheap materials with a stunning result.
Project showcase by Mr-M
Or connect with your social account:
New here? Create an account