In this guide, we will be adding Infrared Remote Control to a RobotGeek Geekbot.
by RobotGeek Projects Team
Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.
Project showcase by potentprintables
Make an R2-D2 replica and control it by an app you programmed. Add a Nokia interface which gives you the Star Wars characters info.
Project tutorial by Kutluhan Aktar
A simple rover for line following made exploiting the ARTe Arduino REal-Time eXtension.
Project showcase by stefano_maugeri
Mr. Big is a large mobile unit that can carry weight up to 8kg.
Project tutorial by mishrarahul1997
This project uses the capabilities of the gen4-uLCD-43DT to collaborate with diverse platforms such as Arduino and HC-05 Bluetooth Module.
Project tutorial by 4D Makers
The task of this machine is to go straight with a flame sensor module that catches the flame and buzzer gives alarm.
Project showcase by giorgiorosso
Analog view timer based on stepper motor and easy driver, controlled by Arduino Nano with two buttons.
Project tutorial by yilmazyurdakul
The ball and beam system is a popular textbook example in control theory and nonlinear dynamics.
Project tutorial by 3 developers
A very simple clock made with 2 Arduino nanos and two stepper motors.
Project showcase by garysat
A 5-axis robot, all 3D-printed, with an Arduino Nano and miniSD card. Path programming and control by IR remote.
Project showcase by Team Kjell Jaeger
A Simple IoT Car!
Project tutorial by P3RISH
A sundial type clock with stepper motors and lasers to show hour and minute.
Project in progress by Mr_Xu
This tutorial will present a simple way to control directions of robot with two potentiometers and several wires.
by Pierre Ruffy & Roxane Alexandre
Handmade MKR1000 IoT Christmas show made of colored cardboard paper.
Project showcase by Majd Janineh
Throttle by wire design utilizing a pedal assist circuit remotely controlled by a smartphone.
Project in progress by Stephen Sizensky
BLYNK app based remote used to control a bot.
This project shows us how we control a "Micro Robot Car" and using a RF Remote Control with "Infineon 3D Magnetic Sensor 2Go".
Project tutorial by Guillermo Guillen
This lesson aims to show how an H bridge works.
Project tutorial by sharma_himanshu
by Magesh Jayakumar
Or connect with your social account:
New here? Create an account