Robot that drives around autonomously in greenhouse environment and identifies diseases.
The DC motor controlling library is provided to control all types of DC motors especially for industrial motion control.
Project tutorial by ambhatt
It's a BLDC motor based jet turbine.
Project tutorial by Arnov Sharma
A tiny telegraph that can write any text messages that look like a telegrammes. This project made of oak plywood.
Project showcase by Yegor_A
A walking insect looking thing made from leftovers.
Project tutorial by Jeremie
A basic robot using Arduino.
Project tutorial by Renga
Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!
Project tutorial by Danny van den Brande
A solar panel that can rotate in two axis either automatically using four light sensors, either manually with the aid of two potentiometers.
Project tutorial by Giannis Arvanitakis
The Recon droid will detect the rebel scum and report back to the Empire. Control movement through Bluetooth or Wi-Fi.
Project in progress by Jeremy Dunham
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
A robot that can climb long vertical poles to clean/paint them, or for security, surveillance or military purposes by attaching a camera.
Project showcase by Pramod C Wickramasinghe
Caravaggio is a drawing machine able to replicate a digital image using a pen and a continuous line.
Project showcase by Michele
Control an Arduino robot with a smartphone using ESP8266.
In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.
Project tutorial by Mark Tashiro
Line Follower Robot with PID control, using an Android device to easily setup the main control parameters for better and fast loop tuning.
Project tutorial by MJRoBot
Jrobot Self Drive (episode 3 of Jrobot series) is a self-driving footpath traveler based on machine learning (Keras and TensorFlow Lite).
Project showcase by joechen
All my servos are a little bit different to each other - I've built a rig to measure what PWM values turn my servos to a specific angle.
Project tutorial by Jeremy Lindsay
Shows how to build a 2WD (two-wheel drive) voice-controlled robot using an Arduino and BitVoicer Server.
Project tutorial by Marcio Tamagushi
Objective of the Swarm-bots project is to study controlling the bot so assemble themselves, avoid obstacle and synchronization between bots.
Project tutorial by Team Hermes
This is 3-axis CNC plotter/engraver based on GRBL software and 2020 aluminum extrusions. Low-cost engraving and PCB manufacturing dual side.
Project tutorial by Amit Nandi (BigWiz)
Jrobot Delivery is ready to deliver your next pizza!
This project shows you how to build a cheap and easy, but very small CNC(Plotter) using Arduino UNO.
Project tutorial by Zain Shahwar
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
by Boian Mitov
Or connect with your social account:
New here? Create an account