A DC motor starter using 600 V CoolMOS™ C7 Gold superjunction MOSFETs for industrial applications.
by Md. Khairul Alam
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
by Dimitris Platis
The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.
by Ingo Lohs
This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.
Project tutorial by adamsstephen
LASER tank controlled by a PS2 wireless controller and you "fire" the LASER turret remotely too.
Project tutorial by SurtrTech
It is about a delta robot that can grab and move objects. It is connected to a Raspberry Pi to play Tic Tac Toe using computer vision.
Project showcase by geordag
Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.
Project showcase by potentprintables
This is a general purpose 3D-printed linear servo actuator (pusher style). Hope these save you some time on a future project!
I am designing and building an MSE (Mouse) Droid from Star Wars, which will have a hidden payload.
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
Project tutorial by MEGA DAS
MeArm robot with using board MeArm v1.6.1 with recording of movemens and with infrared remote controller possibility.
Project tutorial by utilstudio
With this project, you can remotely control your car with Bluetooth.
Project tutorial by Mehmet SARI
Contains Arduino Nano, two step motors and motor drivers, and one servo.
Project tutorial by Mirko Pavleski
Using an Arduino MKR and L298N H-bridge to drive a NEMA 17 stepper.
This project will show you how to make a DIY 4-wheel robot that can be controlled using a smartphone via Dabble, a mobile application.
Project tutorial by STEMpedia
Controlling two servos with a joystick (which was taken out from an old USB controller).
Project tutorial by Arnov Sharma
An Arduino car project based on the RoboRoverM1 chassis.
Project tutorial by Maksim
Partially 3D-printed robot based on Arduino Nano, servos, ultrasonic sensor, and LDR resistors.
This is the basic model of the SMARS robot taken from the Thingiverse.
Code for driving a BLDC motor and adjusting its speed using a pot. This photo shows wires to a slipring in the hollow shaft of a BLDC motor.
Project showcase by mbarraus
Solder your PCBs using a DIY robotic arm.
Project tutorial by AhmedAzouz
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Project tutorial by Samira Peiris
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Or connect with your social account:
New here? Create an account