Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.
Project showcase by potentprintables
This is a general purpose 3D-printed linear servo actuator (pusher style). Hope these save you some time on a future project!
I am designing and building an MSE (Mouse) Droid from Star Wars, which will have a hidden payload.
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
Project tutorial by MEGA DAS
MeArm robot with using board MeArm v1.6.1 with recording of movemens and with infrared remote controller possibility.
Project tutorial by utilstudio
With this project, you can remotely control your car with Bluetooth.
Project tutorial by Mehmet SARI
Contains Arduino Nano, two step motors and motor drivers, and one servo.
Project tutorial by Mirko Pavleski
Using an Arduino MKR and L298N H-bridge to drive a NEMA 17 stepper.
This project will show you how to make a DIY 4-wheel robot that can be controlled using a smartphone via Dabble, a mobile application.
Project tutorial by STEMpedia
Controlling two servos with a joystick (which was taken out from an old USB controller).
Project tutorial by Arnov Sharma
An Arduino car project based on the RoboRoverM1 chassis.
Project tutorial by Maksim
Partially 3D-printed robot based on Arduino Nano, servos, ultrasonic sensor, and LDR resistors.
This is the basic model of the SMARS robot taken from the Thingiverse.
Code for driving a BLDC motor and adjusting its speed using a pot. This photo shows wires to a slipring in the hollow shaft of a BLDC motor.
Project showcase by mbarraus
Solder your PCBs using a DIY robotic arm.
Project tutorial by AhmedAzouz
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Project tutorial by Samira Peiris
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Project tutorial by SurtrTech
This is Unipolar Stepper library in Arduino that gives different functionalities and rotates all unipolar type stepper motors.
Project tutorial by ambhatt
Get a grip! This grip arm allows Vorpal the Hexapod to grab items in a claw that opens and closes, the arm also raises and lowers.
Project showcase by vorpalrobotics
Meet Walbi, a 2:1 scale humanoid with Arduino programs for motion capture and playback. Move it by hand, record and then play it back.
Project tutorial by The Inner Geek
An open source kit to build a walking smart robot dinosaur.
Project in progress by Jacquin Buchanan
This project shows how you can build a car which can be controlled by your smartphone using an android application via Bluetooth.
Project tutorial by JANAK13
This project shows how to control a servo motor with a smartphone via Bluetooth.
Or connect with your social account:
New here? Create an account