Manual and programmable robotic arm with fancy control panel.

A Bluetooth-controlled robot car.

Created with an Arduino, CNC shield, and 3 CD drives (X, Y, and Z). The frame is made out of two dowel rods and a laminate shelf.

A rotating platform based on a stepper motor 28BYJ48, controlled via the X113647 stepper motor driver by serial dialogue.

A light-tracking turret based on two stepper motors - can rotate about 90 degrees in the vertical and 180 degrees in the horizontal plane.

A simple rover for line following made exploiting the ARTe Arduino REal-Time eXtension.

Use computer vision to control a Nerf gun, aim, and fire, all on its own!

Use Aduino NANO for control Rc Servo to tell the Time clock, along with a RTC module DS3231 for time keeping

With stepper motor via microstepping, digital motion processing, auto tuning via Twiddle Algorithmus, cascaded PID Controller

A fully autonomous robot lawn mower.

By harnessing the power of your smartphone, MobBob is a walking, talking robot with voice recognition and computer vision.

A basic model train layout containing a passing siding with a train running around and stopping in an automated sequence.

This motor driver is able to control a motor using PID by I2C. Taking precise control of a motor have never been so easy.

A DC motor starter using 600 V CoolMOS™ C7 Gold superjunction MOSFETs for industrial applications.

A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.

The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.

This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.

LASER tank controlled by a PS2 wireless controller and you "fire" the LASER turret remotely too.

It is about a delta robot that can grab and move objects. It is connected to a Raspberry Pi to play Tic Tac Toe using computer vision.

Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.

This is a general purpose 3D-printed linear servo actuator (pusher style). Hope these save you some time on a future project!

I am designing and building an MSE (Mouse) Droid from Star Wars, which will have a hidden payload.

You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.

MeArm robot with using board MeArm v1.6.1 with recording of movemens and with infrared remote controller possibility.