A two-wheeled, Arduino-based robot that rolls around.
Project tutorial by ashraf_minhaj
A programmable and highly maneuverable robotic cat for STEM education and AI-enhanced services.
Project in progress by Petoi
A laser-cut robot kitten that runs and learns from you.
Project showcase by Rongzhong Li (李荣仲)
Make a program for the Arduino Pro Mini in Visual Studio to control motor speed with PID which can archive it exactly.
Project tutorial by whitebank
Simple robot to build, involve no pcb or proto board, no frames, just using a lot of glues.
Project tutorial by Martedi
A walking four legged robot "mammal style." 3DOF legs, IR receiver all connected to a Pro Mini. Material cost less than $100.
Project tutorial by StaffanEk
This interesting project will cover all things required for the ultimate goal of building a mobile remote surveillance camera.
Project tutorial by danionescu
Use three stepper motors to make the classic analog clock movement in the opposite direction.
Project tutorial by scott mangiacotti
A simple and cheap three wheeled time waster for almost any skill level. Basic stats are Arduino Mini Pro, Sonic distance, and a Gyro.
Project in progress by Team Pigeon Kickers Mod World
A hand gesture-controlled car made from scrap DVD player. Hand gestures detected by gyro and Arduino-driven motor.
Project showcase by ashish_8284
A 3D printed, battery powered box that includes an Arduino, an OLED display and a rotary encoder is used to control a motorized turntable.
Project showcase by Robin1508
Device that manages the USB camera microscope: Make easy focus with DVD stepper motor and light the object with different colors and intens.
Project showcase by Team Borislav Chakarov
Line following robot with RFID sensor for supplying materials and automating workflow - cheap and open source. Inspired by industrial robots
Project tutorial by Nikodem Bartnik
Line followers follow lines, right? But what if you put some LEDs on top and use long exposure? Well, you get this!
Project tutorial by circuito.io team
AVR ATmega32A MCU based, DC Motors speed/position/timing controller/testing board for Stepper, Servo, Gear motors and programmable too.
Project showcase by Shahariar
Cutsie Whun is MEGA BREAD series project #6. A tough, fast, and RC controlled 2 wheeled balancing fun machine. A lot of hard work pays off.
Project in progress by Pigeon-Kicker
I hacked the Breville One-Touch Tea Maker to play music from Star Wars. It plays when the tea basket moves down and when it moves back up.
Project showcase by Brian Chamberlain
Or connect with your social account:
New here? Create an account