KureBas V2.0 has manual mode and obstacle avoiding mode. He has a gripper, WiFi camera and new application that's produced for him.

Make a simple and programmable servo arm out of readily available materials!

An Arduino controlled car that avoids obstacles (ie. walls or objects in front of it).

How to drive an universal AC motor (washing machine) with Arduino and the MST_K07_CL.

This is a precise CNC router that I built to be as inexpensive as possible so that everyone can build it easily.

A laser-cut robot kitten that runs and learns from you.

Bring down the technical and cost barriers of dynamic quadruped robot to a DIY pet.

[@version 1 ] PID loop is used in this project to control the speed of a permanent magnet DC motor.

This Robot can walk exercise and dance! how awesome!! :)

Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.

This is a small robot that will encourage your favorite team, wave the flags, sing, turn on lights to guide your team.

MoveThisWay is an autonomous robot that transports heavy payloads on programmable paths with obstacle detection capability.

Control a servo motor hand with the power of a glove and DIY flex sensors!

My first project in Arduino platform. I combined two features in this project, Bluetooth control mode and obstacle avoiding mode.

Moves chess pieces around the board invisibly and seemingly magically.

An Android-control(BT) system is added in a motor toy boat and it can go any direction slowly.

A computer vision-based package sorting system

Control objects with your hand Gesture

Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.

Solar tracking photovoltaic (dual axis) that follows the sun, using LDR sensors and two DC motors.

This is a general purpose 3D-printed linear servo actuator (pusher style). Hope these save you some time on a future project!

Caravaggio is a drawing machine able to replicate a digital image using a pen and a continuous line.

An attempt to build a beer pong playing robot with questionable results.

The Critter is a simple Arduino walking robot that is fully 3D printed.