Snap Circuits® makes learning electronics easy and fun! These projects are designed for younger kids who want to get introduced IoT.

Dancing Man in 1Sheeld GLCD.

Control a virtual gauge using a potentiometer, Arduino and BLE Shield.

A guide on how to use the OSEPP LCD and keypad shield.

Animated 3D maze on an Arduino. No 3D libraries were used.

Get close and the Arduino is happy; go away and he gets sad.

Hey guys! Here is a new tutorial to teach you how to make a digital clock based on the LIXIE display technology using an Arduino board.

An overview of the 8x8 LED Matrix with a HT16K33 backpack. I will go from wiring to having some fun with it.

Basic code to make Arduino communicate with ILI9341.

A clock, controlled by a RTC module, that you can see on a 4-digit display.

You can communicate your Nextion LCD with your Arduino UNO by Software serial ... a liitle tricky but not much :)

Use only 3 digital pins on your Arduino to display characters on the single digit 7-segment display.

Wanna play with some graphic or make a touch interface? Use this DFRobot's Touch Shield for Arduino UNO!

With photocells in both goals and a bright LED-display on the table, a USB powerbank provides action for at least 30 hours.

Hooking up an old SONY CRT viewfinder to Arduino.

LcdProgressBar displays a progress bar in LCD display.

This tutorial shows how to control an array of 8x8 LED matrices using an Arduino Uno, to create the face of a robot.

Arduino clock, easy to assemble, you can set the date and time by the Serial monitor

This is the customized LCD1602 shield for both Arduino MKR and UNO boards.

Learn how to use the 16x2 LCD with Arduino for various projects.

A very easy Genuino UNO project with LCD and DHT11 temp. and humidity sensor. The LCD shows the temp., humidity and other infos.

An analog-style BMP180 barometer.

A large 4-digit 7-segment counter with LiPo backup, in case USB power is cut.

Display the results from the HC-SR04 ultrasonic sensor on an LCD display using 433MHz transmitter and receiver.