Yes, you CAN load and display BMPs from that card reader on the back of your tiny TFT screen!

Alarm Clock with Arduino.

Want to display text? Here is your component!

Writing in a 4 digit 7 segment LED display.

A simple Arduino clock without RTC module for beginners.

Digital and binary Clock using Arduino, RTC, two LED matrix, operating in 4 different modes (AM-PM / 24 HS / 02 types of fonts).

A guide on how to use the OSEPP LCD and keypad shield.

Digital clock with Arduino using Shift Register (74HC595), real time clock, temperature and humidity sensor and 7 Segments display.

The simplest Arduino LCD clock ever designed. Only needs an Arduino UNO, a 1602 LCD, and two buttons. No resistors, no potentiometer.

A simple, yet effective, temperature telling device that updates every 5 minutes giving you the temperature of your room!

Complete Digital Clock including many features: Alarm, Temperature, Humidy, Dew Point, RTC and PIR (Presence Infrared Sensor).

Arduino stopwatch and lap timer with excelent accuracy and responsiveness!

An alarm clock using a DS1302 RTC and a buzzer. You can set the RTC by a keypad as well as set the alarm.

In this project I'll show you a simple way to control a 7 Segment Display with a keypad!

A very easy Genuino UNO project with LCD and DHT11 temp. and humidity sensor. The LCD shows the temp., humidity and other infos.

Basic code to make Arduino communicate with ILI9341.

This digital clock driven by Arduino is a fun emulator of 4-stroke engine where the digits of hours & minutes represent the pistons moving.

Here, you will learn how to use TFT LCDs by Arduino. From basic commands to professional designs and technics are all explained here.

This project is about an Arduino running a digital clock, a stopwatch, and a timer simultaneously!

You can communicate your Nextion LCD with your Arduino UNO by Software serial ... a liitle tricky but not much :)

A clock, controlled by a RTC module, that you can see on a 4-digit display.

This is how to make your own LCD timer, just with an Arduino, a LCD screen and some hook-up wires.

In this article, you will learn how to run OLEDs by Arduino, and display text, images, and animations on them.

This project will show you how to make with Arduino and 16X2 LCD real time display from your computer.