You can communicate your Nextion LCD with your Arduino UNO by Software serial ... a liitle tricky but not much :)
by Tamer Savaşcı
Take photos on a Windows Phone and display them on a matrix of 48x48 RGB LEDs, using the Windows Remote Arduino library.
Project showcase by Windows IoT
This project is about a stopwatch including the feature of lap time counter and controlled by Arduino (Nano or Uno).
Project tutorial by LAGSILVA
How to drive a seven segment display using only four pins.
A QR generation library was ported to the Arduino UNO and Seeed LCD touchscreen platform. Displays time with seconds. Very distracting.
Project tutorial by Arduino Enigma
These 84 by 48 pixel LCDs are what you might have found in Nokia 3310. And what about using them in the Arduino projects?
Driving a Single Digit 7 Segment LED Display requires 8 of an Arduino's 20 or so I/O pins. Using a 74HC595 shift register only requires 3.
by Mel Lester Jr
This project displays the readings of the ultrasonic sensor on LCD of your smartphone through 1Sheeld
Project tutorial by adam johns
Cool project to begin with 128x64 OLED, done with a twisted logic to fix the refresh flashing screen.
Project showcase by javier muñoz sáez
How to make an easy and adaptable countdown.
Project showcase by Marcazzan_M
48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.
Project tutorial by Prasanth K S
In this article, we are going to make an Arduino weather clock which will tell us the time, date and temperature.
Project tutorial by Keval Doshi
Ever want to control an 8x8 LED Matrix? Here is a controller that can help.
by David A Riewe
Simple wall clock using Adafruit 1/4 60 Ring Neopixel
Project tutorial by antiElectron
A big display with eight 7 segment modules.
Project tutorial by Danilo Bargen
A digital clock using minimum components
Project showcase by garysat
Arduino driver for 8x8 LED Modules controlled via MAX722xx.
Project tutorial by miklas
This is an uncommon digital clock that can run in three different modes: mode digital and two different modes of binary clock.
This lesson is about interfacing LCDs with Arduino.
An Arduino UNO large clock on a 16x2 LCD display shield with the ability to change hours and minutes.
Project showcase by Arduino World
After many failed attempts, find the way to connect my 128X64 screen with my Arduino 101, and make a mini tutorial for all users to use.
Project tutorial by Alexis Santiago Allende
Or connect with your social account:
New here? Create an account