Weather forecast clock made from a Nano, a salvaged alarm, a BME280 sensor, a DS1307 RTC, an old cell phone battery, and Nokia 5110 screen.
Project showcase by LenkaDesign
Temperature, humidity and barometric pressure showing a comparison to a previous point in time and graphing the trend.
Project showcase by ragingradish
An alarm clock using a DS1302 RTC and a buzzer. You can set the RTC by a keypad as well as set the alarm.
Project tutorial by SurtrTech
Arduino Nano 32x8 LED matrix displaying date, time, temperature and humidity with a motion sensor.
Project showcase by ericBcreator
Want to display text? Here is your component!
With a Windows tablet, Arduino, and HC-SR04, you can create a graphical caliper to show the distance.
by Philip Ushijima
The simplest Arduino LCD clock ever designed. Only needs an Arduino UNO, a 1602 LCD, and two buttons. No resistors, no potentiometer.
Project tutorial by plouc68000
You can upload your design to your Nextion LCD with USB UART. No need to use an SD card. Fast and easy.
by Tamer Savaşcı
It shows the current temperature on an 8*8 dot matrix display using DHT11 temperature sensor.
Project showcase by Nekhil ravi
Interfacing the shield with Arduino UNO board and fixing the touch detection and inversion problem.
Visualize the DCF77 radio signals with this clock. It also tell you the time.
Project tutorial by edr1924
Build your Nixie Tubes display easy.
Project tutorial by GRA_AND_AFCH
A digital clock using minimum components.
Project showcase by garysat
I love swimming, but I tend to lose count of the laps, so I made this lap counter with an Arduino.
Project showcase by Ruben Zilzer
A clock, controlled by a RTC module, that you can see on a 4-digit display.
Gixie Clock is a modern device that reproduces the retro beauty of Nixie tube displays.
Project showcase by xingda
This is how to make your own LCD timer, just with an Arduino, a LCD screen and some hook-up wires.
Project showcase by Hugo Blanc
An Arduino analog clock refreshed by GPS on TFT display - Steampunk GPS Clock.
Project showcase by Mobifu1
In this sample, we will connect an RGB LED strip to an Arduino and control it to indicate the weather forecast behind a picture.
Project tutorial by Team Windows IoT
DIY onboard computer for bicycle
Project in progress by Pararera
An Arduino-based clock project.
Project tutorial by TheTNR
An analog/digital clock using Arduino Nano, DS1307 & Nokia 5110.
Alarm Clock with Arduino.
Dot Matrix Display is a matrix of LED connected in 16x32 pattern. We can wirelessly transfer messages over mobile to DMD using Bluetooth.
by ASHRU ABHIJIT PATTNAIK
Or connect with your social account:
New here? Create an account