A simple to build clock with many features.

A picture that updates every day.

Start sequence to race, then show winner for Hot Wheels type cars. Displays total race time, both car speeds and winning difference in ms.

Easily display custom animated glyphs on 16x2 LCD using the createChar() function from the LiquidCrystal library.

Relativty, an open-source VR headset with a 2K 120FPS display, SteamVR support, and experimental room-scaling. You can build it for $200.

Hey guys! Here is a new tutorial to teach you how to make a digital clock based on the LIXIE display technology using an Arduino board.

This project is similar to my previous one but uses the FHT library which turns out to be at least 4 times faster than the FFT.

The simplest Arduino LCD clock ever designed. Only needs an Arduino UNO, a 1602 LCD, and two buttons. No resistors, no potentiometer.

VFD tubes are a good alternative to Nixie Tubes, especially in retro clock projects. Read about how they can be used with an Arduino.

Arduino Uno and Visuino: GPS Location display with GPS and TFT Touchscreen Display Shields - Quick and Easy!

Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.

This project demonstrates the use of electronics and embedded system with clock.

Designed for crew rowing, this speedcoach is designed to track split times and total meters traveled.

2 x 16-band audio spectrum analyzer with Arduino Nano and 2 x 16 chars LCD display. This project is based on Shajeeb's project.

A simple clock using LED matrix and RTC to display the time, date and temperature.

An alarm clock showing the Jewish (Hebrew) date, the Gregorian date, current time, time of nightfall, sunrise, etc

This project describes how to build a GPS data logger at a lower cost.

Alarm Clock with Arduino.

This project will show you how to make a simple Clock using a RTC Clock and a LCD.

An LCD buddy that reacts to you!

48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.

Sending data over Laser from one Arduino to another using a keypad and an LCD(100b/second)

A little tutorial to make a digital photo frame, and also use the touch functions to navigate between images.

Photo frame that counts the number of days spent together.