+ LCD/OLED can be used to measure body temperature or to detect movement... in Celsius and Fahrenheit!
In this tutorial, you will learn how to use a soil moisture sensor. Practical examples are also provided to help you master the code.
In this protip, I will show you how to build DS18B20 Digital Thermometer with Arduino.
by Konstantin Dimitrov
In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.
by Aritro Mukherjee
This system monitors the moisture of soil and waters it by 5v DC motor based water pump when needed.
by Neeti Thakur Bisen
Did you know that a standard three-wire PC Fan can be used as a sensor?
by Daniel Porrey
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely without taking
Make a Ultrasonic Range Detector Using Arduino and SR-04F to measure any distance without using rulers with this simple tutorial.
This project will guide you to set up an alarm system using a motion detector.
by Team ONYX
This project is an Arduino radar. It is a simulation of a radar.
I found limited documentation on the usage of a color sensor I recently purchased, so here is my attempt to make it more simple.
Need your project to gauge distance? Here's your module!
Code and explanation for getting directional and motion data from the raw sensor outputs.
by Shubham Paul and Samhita Ganguly
This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
by Wimpie van den Berg
This little project will show you how to use a soil moisture sensor.
A basic introduction to the low cost and accurate HC-SR04!
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can get GPS / NMEA data from it.
Using the VL53LO and an Arduino for distance measurement.
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can issue AT commands from your computer.
A standard speaker can be used to detect vibrations and send data to a microcontroller.
I got my first Arduino recently, here I am gonna show you my first project which is Distance Measurement Using Ultrasonic sensors.
by Zakariye Abdirahman
How build a simple thermometer using a silicon diode
In this tutorial, you will learn how to calibrate and use MQ9 gas sensor with an Arduino board.
This project will show you how to use temperature and hmidity (DHT11 and DHT22) sensors with an Arduino card.
Or connect with your social account:
New here? Create an account