Outside precision thermometer, based on B+B Thermo Technik Precision temperature sensor TS-NTC-103, 10 kΩ.
Project tutorial by Peter Groeneveld
A feedback control system which can control the given fluid level and display us the water level in a tank.
Project tutorial by Rushabh Jain
This project will guide you to set up an alarm system using a motion detector.
How to measuring the air quality of the Open Data Institute using an Arduino and a Shinyei PPD-42.
Project tutorial by OpenSensors.io
I found limited documentation on the usage of a color sensor I recently purchased, so here is my attempt to make it more simple.
Portable project that displays the current temperature on an LCD display.
Project tutorial by Isaac100
Here is how to use the YL-39 + YL-69 soil humidity sensor with any Arduino.
Project tutorial by Sorin Trimbitas
Need your project to gauge distance? Here's your module!
Dozing off in class and meetings? Prove why! Measure CO2 levels and publish to the cloud using anduinoWiFi and Adafruit IO.
Project tutorial by Brian Carbonette
PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small
Project tutorial by DIY Partners
Arduino learned how to tell the temperature
Project tutorial by Grant
Light show synchronized to music? Automatic lighting? Earthquake analysis? Just use a Curie!
Project tutorial by Chris Kuzma
An easy-to-build and low-cost water quality monitor.
Project showcase by Wen-Liang Lin
Water level with LED alarms and buzzer with level distance and temp on LCD.
Project tutorial by MichDragstar
The Grove Gas Sensor (MQ2) module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4 and CO.
Project showcase by Mahamudul Karim Khondaker
Do you want to build an easy security system? Well this is the perfect tutorial for you!
Project tutorial by Abishek Bhalaaji
Bicycle odometer and speedometer showing distance traveled, average and current speed (in km/hr), time and can store up to 99 laps.
Project in progress by alan_dewindt
On the display is printed temperature (celsius) and humidity (%) with a DHT11. When it's raining the LED lights up. You need a rain sensor!
Project showcase by Rick_Findus
This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
by Wimpie van den Berg
+ OLED display, measures in imperial and metric.
Project tutorial by SurtrTech
Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
Using the VL53LO and an Arduino for distance measurement.
Easy to build temperature and humidity sensor with a cheap 2x16 LCD.
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can issue AT commands from your computer.
Or connect with your social account:
New here? Create an account