Using the VL53LO and an Arduino for distance measurement.
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can issue AT commands from your computer.
Cabs4Cabs: Consolidated Arduino Based Sureveillance for Cabs.
Project in progress by Drishti Kanjilal and Aditi Ja
Using one single module and a proper library you'll be able to measure any AC voltage like a TRMS multimeter.
Project tutorial by SurtrTech
Senses for smoke in the air near a 3D printer and will sound an alarm and turn off power to the printer if smoke is detected.
Project tutorial by Miles Nash
In this project I made a touch sensor using a coin that works based on Arduino Capacitive Sensing Library.
Project tutorial by Amal Mathew
This parking sensor with Arduino is an easy project.
Project showcase by Team VINICIUS LOPES
An easy project using stuff from the starter kit: Arduino Uno, temperature sensor, 16x2 LCD display, some LEDs and a Piezo.
Project showcase by GioMac
A beginner-tier project I hope will help the fellows that are newbies in the Arduino world!
Project showcase by
An easy setup for smart air purifier system. This system use Amazon IoT with MQTT protocol to get real-time data of air quality condition.
Project tutorial by Aaron Kow
A standard speaker can be used to detect vibrations and send data to a microcontroller.
How build a simple thermometer using a silicon diode
Yet another Arduino weather station. Hey, they're fun!
Project in progress by wrightmac
In this tutorial, you will learn how to calibrate and use MQ9 gas sensor with an Arduino board.
It measures the distance between you and the place where you point it to. Hope you'll enjoy it!
It reads from up to eight temperature sensors (DS18B20) and displays on the LCD display (16x2)
This project will show you how to use temperature and hmidity (DHT11 and DHT22) sensors with an Arduino card.
A simple tutorial on getting readings from an ultrasonic sensor
by Damien Murtagh
Here we measure rainfall.
Project showcase by Mahamudul Karim Khondaker
Worried about the quality of air around you? This project will help you monitor the air pollution levels in your surroundings!
Project tutorial by circuito.io team
An Arduino based device to read multiple DS18B20 sensors and send the values through a RS232 connection to a domotica system.
Project tutorial by WT040
How to use the small module to measure distance for high frequency applications... or low.
Seismic activity or "Vibrations of the earth" is measured using ProtoCentral's OpenPressure 24-bit DAQ System.
Project showcase by Team ProtoCentral
We need to sense intensity of light in many of our IoT/home automation projects. Here I explain a simple implementation of ambient sensor.
by Anas Dalintakam
Or connect with your social account:
New here? Create an account