This is a 360 radar using an ultrasonic sensor that saves data and encodes them onto an image.
Project tutorial by Alireza Karkon
Senses for smoke in the air near a 3D printer and will sound an alarm and turn off power to the printer if smoke is detected.
Project tutorial by Miles Nash
Portable distance detection device using an Arduino and an ultrasonic sensor.
Project tutorial by Viktor S
Create a DHT11/DHT22 breakout board for your Raspberry Pi running Windows 10 IoT Core using an ATtiny85.
Project tutorial by Daniel Porrey
An SKU237545 pressure sensor.
Project tutorial by Fillbee
Do you want to build an easy security system? Well this is the perfect tutorial for you!
Project tutorial by Abishek Bhalaaji
An easy project using stuff from the starter kit: Arduino Uno, temperature sensor, 16x2 LCD display, some LEDs and a Piezo.
Project showcase by GioMac
This is a low cost, modular smart board with wireless capabilities.
Project tutorial by Adellar Irankunda
This project is about a simple movement detector. Whenever any obstacle comes in a line (predefined) a light will glow.
Project showcase by Sriram MN
This parking sensor with Arduino is an easy project.
Project showcase by Team VINICIUS LOPES
A DHT11 connected to Blynk to read data
Project tutorial by Tech with Matthew
An easy setup for smart air purifier system. This system use Amazon IoT with MQTT protocol to get real-time data of air quality condition.
Project tutorial by Aaron Kow
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Project in progress by Javi D'Ambra
Cabs4Cabs: Consolidated Arduino Based Sureveillance for Cabs.
Project in progress by Aditi Ja and Drishti Kanjilal
Weather station monitors temperature, pressure, light, dust, soil moisture values and displays on the OLED screen and Cayenne dashboard.
Project tutorial by Tadeas Dvoracek
Yet another Arduino weather station. Hey, they're fun!
Project in progress by wrightmac
Obstacle distance is measured using ultrasonic sensor and Arduino. The data is processed using Processing and the distance is marked.
Project showcase by TEAM DIY
Want to measure solar radiation but cant afford a Pyranometers? Well, make your own device with your Arduino board using this guide.
Project tutorial by Jeffrey
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Easy to build temperature and humidity sensor with a cheap 2x16 LCD.
An Arduino Uno with DHT11 sensor module, three LEDs and a Piezo speaker.
It measures the distance between you and the place where you point it to. Hope you'll enjoy it!
Project showcase by onatto22
Homegrown sump pit monitor with Nagios integration.
Project showcase by loupalladino
How to build an humidity and temperature meter with time display from an old voltage meter casing.
Project showcase by Mr_Xu
Or connect with your social account:
New here? Create an account