The ability to meter the strength and direction of the magnetic field can be handy sometimes.
Project tutorial by Tanishq Jaiswal
A telescope alignment compass, for amateur stronomes, without GPS
Project tutorial by Armando Leonardo
A simple project to make a GPS log station with data speed, max speed, distance trip and altitude. data are write on SD card
Project tutorial by wrighi
Setting up a new blade for a band saw is sometimes a hard job. But there could be help with Arduino power.
Project tutorial by Thomas Angielsky
We can measure body temperature without contact with this device.
Project tutorial by Akshay Joseph
Arduino Stepper Motor Barometer with additional displays for last 3 & 6 hour pressure changes.
Project tutorial by Brett Oliver
Follow this project to make an infrared thermometer by yourself!
Project tutorial by Deion Adel
Park your car with help from the power of the sun!
Project tutorial by aams86
Use Arduino and Raspberry Pi to get notified if a hot water heater pilot light goes out.
Project tutorial by Ryan Carlson
Despike/smooth data from a DHT22 with a median filter and display on a 0.96 inch OLED with the date and time from a DS3231 real-time clock!
Project tutorial by VE1DX
Use the IO Expander and accessories to connect OLED screens and I2C sensors over a 100ft away.
Project tutorial by Christian
Geiger counter measuring radioactivity using Arduino Nano in 3D-printed housing, with OLED display and Li-ion battery.
Project tutorial by Pedro52
Very simple air quality monitor with nice processing graphical interface oh PC monitor.
Project tutorial by Mirko Pavleski
Nice looking weather station based on BMP180 and DHT11 sensor boards.
Improve reliability of measurements using PPD42NS sensor using modular 3D printed solution which includes exclosure box for sensor.
A cheap DIY air quality monitoring device.
Use a DHT22 sensor with Arduino to acquire room relative humidity, temperature, humidex. Show values on display. Log data with MATLAB.
Project tutorial by dancili
A simple device that makes controlling humidity and saving energy a snap. Operates as easily as a thermostat.
Project tutorial by Shaeroden
An interesting way to increase sensitivity and reduce the noise of the ADXL335 analog accelerometer.
How to use a GY86 (wave measurements) and water temperature sensor.
Project tutorial by T3ch Flicks
A super smart buoy with lots of sensors that sends data over radio to a base station where it is displayed on a real-time dashboard!
The ball and beam system is laboratory equipment with high nonlinearity in its dynamics and PID control.
Project tutorial by Karem Ben Chikha
Literally the simplest way to make a weather station!
Project tutorial by Mission Critical
Remote temperature monitor using a Bluetooth module and an NTC thermistor. An Android app made with App Inventor is used to read data.
Project tutorial by Federico Vivaldi
Or connect with your social account:
New here? Create an account